What are the conditions for the installation of the universal material testing machine

What conditions should the laboratory have before the installation of the experimental instrument?
1. Confirmation of laboratory location
The laboratory should be built in the factory area away the main road the large earthquake source, away the workshop with large smoke dust.

2. Laboratory safety measures
The vast majority of chemicals are toxic, some are highly toxic, some are highly corrosive, some are flammable explosive. Therefore, it is necessary to pay attention to classified storage, qualified laboratories should establish special storage rooms for medicines, etc., there should be fireproof equipment indoors. For example, the artificial climate simulation experiment system requires two indoor outdoor laboratories to ensure safety.

3. The overall design of the laboratory

According to the characteristics of laboratory data elements, each branch shall be established, instruments equipment shall be scientifically arranged installed, electric power lines, water pipes sewage discharge pipes shall be arranged, reasonable lighting, natural ventilation lighting shall be provided. Such instruments as low-temperature freeze-off testing machines, data performance testing machines testing instruments are places ventilation is required.
4. Laboratory workbench
Customers can purchase reagent racks place them on the laboratory workbench. During operation, such as graduated pipettes test tubes, it is easy to use, convenient practical, but it must be kept at a certain distance the equipment. The test bench is close to the end of the pool. Reagents chemical operation platforms are convenient for the flushing of glass bottles tubes after operation. Special attention should be paid to the fact that the space between the primary instruments must be slightly larger to prevent the mutual corrosion of reagents the influence of mutual working temperature voltage.
5. Laboratory power equipment
The diameter of the power wire introduced into the laboratory should be determined according to the total power of the laboratory equipment. The power equipment of the laboratory should have a dedicated line good grounding. The power supply is 220V single-phase three-wire power supply. Pay attention to the need for good grounding. Each area of the cement testing instrument laboratory must have a power socket. The socket depends on the instrument plug.
6. The base fixing drawings of the experimental instrument
(1) When the large-scale experimental equipment is required to fix the base, contact the manufacturer to request the base-fixed drawing of the experimental instrument, build the anchor bolts according to the space required by the drawing to ensure accuracy large-scale equipment (1T) The above experimental equipment must require a shareholder base, otherwise the accuracy durability of the echo equipment will be affected.